Star 45

Star 45

Wednesday, January 31, 2007

Racy SUPER MODELS - radio controlled model yacht racing Boat/US Magazine

Racy SUPER MODELS - radio controlled model yacht racing Boat/US Magazine:

"Racy SUPER MODELS - radio controlled model yacht racing
Boat/US Magazine, May, 2000 by Elaine Dickinson

With the pop of the starting gun, all hands flew into action. Rudders strained to tack sharply and get on the favored side of the racing course; sails were trimmed tight as a drum to eke every last iota of speed out of the wind; waves slammed into bows and washed clear over the decks. And as the fleet raced toward the first turning mark, the atmosphere intensified and nervous fingers grabbed the toggle switches for additional maneuvering.

Toggle switches?

Model yacht racing, or 'RC' racing (for 'radio controlled') is what gets many boaters through the winter. It keeps the adrenaline flowing from the thrill of competition, albeit on a small scale. But, like boating, it offers camaraderie and fun that's easily accessible to anyone with working fingers and enough charged up AA batteries for an afternoon of sailing.

Thinking small is easier on the bank account as well. The outlay for a ready-to-sail RC boat is usually in the hundreds of dollars, not thousands. Access to the water is as simple to find as a quiet pond at a local park. Some cities have even built special yacht racing ponds, such as San Diego, because it's such an eye-catching attraction.
Advertisement

'Model racing is less of a commitment in terms of time as well as money,' said Dick Rutledge, a BoatU.S. member from Houston who is also the national vice president of the American Model Yacht Association (AMYA), the all-volunteer organization which sanctions classes of RC boats and all official races. 'I can have my model loaded and on the water in 20 minutes.'

Rutledge and his wife Nancy are avid racers on Lake Conroe in Texas and compete in their full-sized 'people boat,' a Ranger 22. One day at the dock, one of their Ranger class friends was playing with a model yacht and handed the control box to Rutledge. 'I was hooked,' he said, and now travels throughout the U.S. to compete in the Star 45 and 36/600 class races. His wife is a top competitor as well. The Rutledges also belong to the Houston Model Yacht Club, one of 120 in the U.S. that organize local races."

Thursday, January 18, 2007

The Big Day!! Star 45 Launch






From: John Whiteford


G'day ,
Great morning yesterday when we launched Oribi tho for the first time for some time the weather was overcast and the wind fickle. However all went well and she looked pretty good and some good comments from the few members there. Had a couple of nice gusts which pushed her along and she went well, so looking forward to next time. Took heaps of photos and attach the best here. Must qualify the CHRISTENING!! The phial in Julia's hand contains red wine which she rubbed over the bow with her finger....not allowed to take alcohol into this park!! So I drank the rest last night!!!!! Also please note the cap in PROUD OWNERS. I got quite a few comments re this!!! and stirred them up!!! I was wondering if any of these should be placed on the Star45 website and where. If you think so would you be kind enough to copy them there for me please Don. Also thanks for the advice on the bow bumper and will sort something out along that idea.
Kind regards,
John







Thursday, January 04, 2007

S45 Construction : rigging b.o.m. from John Fisher

To:Star45@yahoogroups.com
From: 'J Fisher'jfisher@wildblue.net
Sender: Star45@yahoogroups.com
Date: Wed, 3 Jan 2007 21:02:38 -0700 (Mountain Standard Time)
Subject: Re: [Star45] Deck rigging and such

Here is the list on the star 45 yahoo groups for rigging. I am using the following for my next couple of builds:
GBMY item #, description, qty, purpose
019, 3/8' alloy tube, 1, Jib boom
034, Hales single block, 2, main and jib sheets
146, tapered drain plug, 1, plug in transom
182, Z sheet hook, 2, sheet ends/boom attachment
202, large bowsie, 1, back stay/forestay with 80 lb Dacron, order small ones if using spektra
206, O-rings, 1, hold the Z hooks to the boom.
254, double block, 2, main sheet and jib sheet adjuster
255, sheet exit, 1, turning block for main sheet from under deck to above deck.
269, eye plate, 1, mounting for jib block.
272, 180 deg sheet lead, 1, turn around for jib tweaker
280, sheet hook, 1, hooks for backstay and fore stay.
282, tang, 1, attach lowers to mast.
907, rigging screw, 4 hooks, 2 packs, upper and lowers to the deck.

I also build my own chain plates, so I don't order them from GBMY. Don does carry them if you need them. I also like the Ludwig mast better than the bantock mast, so I ordered 8 foot masts cut to 69' from Larry Ludwig, the other 28' or so is the main boom. Last time I made all my own boom vang, mast fitting. This time I ordered them from Larry. You can use the bantock mast, boom, and fittings from GBMY as well. They are good stuff and I have them on my IOM.

The back stay crane is made from 1/16 (.063') aluminum that I bought at the local hobby shop.

John"

Wednesday, January 03, 2007

S45 Construction : Re: Woodie construction tip

"To: Star45@yahoogroups.com
From: 'Mitch Martin'
Sender: Star45@yahoogroups.com
Date: Wed, 03 Jan 2007 00:01:50 -0000
Subject: [Star45] Re: Woodie construction tip

Thanks for the encouragement! To answer your questions: I CAed the
1/32' bass wood to the frames and stringers. When I epoxy the
inside it will make the permanent bond. The layers of veneer are
cold molded with system 3 epoxy. I will have two layers on the
bottom and one on the sides, then glass with epoxy and .6 oz glass
cloth. Then one more layer of veneer. I do intend to laser some
patterns into the veneer. Then I'll finish with more clear epoxy
(probably west) and then varnish. Like I said, it's not going to be
light, but will look like a jewelery box when done.

--- In Star45@yahoogroups.com, Drake Dunivan
wrote:
>
> Thanks for that tip, its always nice to learn from
> someone elses mistakes :)
>
> What are you using for the adhesive? CA? Tightbond
> III?
>
> Hopefully everything else goes smoothly.
> drake
>
>
> --- Mitch Martin wrote:
>
> > I just made a mistake on my woodie and wanted to
> > pass along the tip.
> > You must install the side planks before installing
> > the botton planks.
> >
> > I tried to do the bottom first and it bent the thin
> > chine rails up and
> > now I have a wavy chine. It can be sanded out a
> > little but it's not
> > as good as I would have liked. Also, I have started
> > veneering the
> > hull with .035' maple and mohagany veneers. Should
> > be nice looking
> > when done.
> >
> > Best, Mitch
> >"