Star 45

Star 45

Tuesday, September 09, 2008

fiberglass notes

From: "David Ramos"
Sender: Star45@yahoogroups.com
Date: Mon, 10 Sep 2007 11:25:22 -0400
Subject: RE: [Star45] Fiberglass deformation from cradle

Mitch You might try taking a hair dryer and GENTLY heat the hull in the area of deformation and if you can reach it on the inside press the hull out. You want to just heat the hull in the area around the deformation enough to get it to relax a bit. Be careful to not scorch the hull. Take your time and then let it set upside down to cool. I used this technique (but used a heat gun) to fix an older EC12 that did the same thing. Was your keel attached? If so make some sort of support to take the weight of the keel and use the hull cradle to keep it on the wall but not support the weight of the boat.